Dead space 2 freezes at chapter 7. solution of problems

After skimping in the store, visiting the save point, go down the corridor. Soon you will reach the elevator of the solar cluster, which is not working, go to the next room. There will be a huge block of metal in the room, which must be moved by shooting at the red dot - the fuse of the engine. Before you will be a huge room where there is no gravity.

Going down to the very bottom, near the corpses, you will find a diagram of disks for a pipe cutter, as well as ammunition. If you go down into the large hole in the center, you can find Power Node 1(7).

There is a large platform in the center of the room, under it there are boosters, which you need to shoot one by one in order for the platform to start moving up. When it reaches its destination, return to the room where the booster was fired in to drive away the pile of scrap metal and return through the door to the solar cluster elevator. On the way, you may be attacked by a Necromorph who loves to move along the ceiling. In the elevator, I do not recommend admiring the scenery for a long time, but stand in the center and wait ... Wait for depressurization and attacks of monsters that will climb from all sides. To "drive" the monsters, you need to shoot at the yellow flesh, but be careful and constantly look around: the creatures will climb from all sides. You don’t have to worry about the air - as soon as you get to the top, the automation will restore the oxygen supply.

You will find yourself on a floor where the elevator is surrounded by metal paths, in several places there are cabinets with useful contents. Near them are mines. The developers suggest throwing blue canisters in the direction of the mines, and while they are frozen, collect the contents of the lockers. However, if you have some ammo, you can just shoot the mines and calmly take the contents of the lockers. In one of them you will find a diagram of a power pistol. Further through the door you will enter a new room, where a friendly holographic girl will ask you to wait, what not to do. Turning left, you will find a room with a magazine and power node 2 (7).

The further passage of the game Dead Space 2 will lead you to a save point and a door that does not open. Having proceeded to the opposite part of the corridor - to the landscape on the wall or to the right, you will find a room with a corpse. Using kinesis, take the corpse and take it to the door that the recognition system did not let you in. The system recognizes the corpse of Howard Phillips - the stationmaster and opens the door.

You will enter the corridor, in which the same holographic girl will flicker in the distance, but when she is just a stone's throw away, the lasers will turn on. They can be disabled in two ways: by throwing the barrel on the right at the laser beam, or by shooting accurately. Pay attention to the fact that in the adjacent - right corridor, if you destroy the laser beams, then you can find power node 3 (7) on the wall. In the next large warehouse, one Necromorph is waiting for you, then when you reach the middle of the hall, lasers will turn on and the appearance of Necromorphs will provoke their explosion, after which be ready to shoot at the red triangle so that it does not blow into space, then you will be protected from small demolitionists. Through a single door, you will enter a room with a stasis recharge and a control box, which traditionally needs to be hacked. After that, you need to fight off the necromorphs and use the elevator, which is also located in the hall, to rise to the second level, where a workbench awaits you.

To continue the passage of Dead Space 2, you will need to go along the metal bridge and use kinesis to remove the metal shield and lower the bridge (the kinesis sign is located at the top). Then Tideman, your main opponent, will get in touch and bring bad news. Well, don't get used to it, go further, destroying the laser barriers and in the lockers that will be on the right, take the power node 4 (7).

In the next room you are waiting for the blackout. This can be dealt with by hacking the control box in the middle of the corridor, but first you need to destroy the two runners that are trying to kill you.

Next, you will find a server room, where you will be impudently locked up. Well, well, you need to get out to continue the passage of the game Dead Space 2. In one of the rooms, remove the shield with the kinesis icon from the wall and move on through the ventilation hole behind it. In the next room, there are three shields with batteries behind them. Take them off. You need to transfer two batteries from the first two shields to the third and arrange the batteries in the order indicated on the floor on the right. Then you can turn off the protection and return through the ventilation hole through which you came. As soon as you get out of the tunnel, turn around and use the switch on the right to change the direction of the corridor, then climb into it again and get into a new room.

In the new room you will find a rebus similar to the previous one. Then you need to get out through the ventilation corridor, through which you got here and now you are already in the center of the server room, but be prepared for a meeting with a couple of monsters. Destroy the energy devices with the radiation icon (5) and kill the Necromorphs. After that, a door to a new room will become available to you, where a new type of opponent awaits you - spiders (a power pistol has proven itself well against them), as well as mines. The next hall of the passage of the game Dead Space 2 will delight you with an equally strong attack of monsters. In this hall, you can find a save point, an emergency storage with a power cutter circuit inside, and the entrance to the cluster maintenance capsule. Use the entrance and press the elevator button to go up a level.

Then you will go out into outer space. Here is where to roam:

• stations for recharging oxygen are placed around the entire perimeter, so there will be no problems with air, there are a lot of stations;
• here you will find many boxes full of ammunition and money;
• unfortunately, the necromorphs got here too - in one of the parts of the platform there is a huge creature that will shoot projectiles at you. To destroy it, shoot at the yellow flesh from which projectiles fly out. This creature can be dealt with both close and from a long distance, and although the accuracy in this case is worse, there is still time to get rid of homing projectiles;
• Your main task is to direct the beams that are now hitting into space at the central tower. To do this, you need to fly up to the cluster and connect to the control panel, to the right of the mirror itself. The Cluster Control Panel is a series of blue monitors that are attached together. Similarly, you will have to work on 2 clusters.

After setting up all the mirrors, go back to the control room (where you took the elevator) and after a communication session with Ellie, use the catapult to continue the passage of the Dead Space 2 game. While you are flying, you must carefully avoid various fragments and buildings: they can be deadly for you.

Right-left-left-right-two pipes-right - this is an approximate list of your actions while you are flying. Land you in a room full of ammunition. In the next room you will find a store and a save point. At this point, I recommend preparing for a hot battle, as it will be difficult further. You will find yourself in the hall where Ellie and Strauss were last seen. Don't waste time chatting and quickly collect ammo and ammunition. Soon the real battle will begin. While Ellie will open the CЄС door leading to the further passage of Dead Space 2, you will have to destroy the crowds of monsters that will appear in the hall. You need to hold out for 50 seconds, then quickly go through the door, and the torment is over. By pressing the elevator button, you will send Isaac straight to the eighth chapter.

DEAD SPACE 2 CHAPTER 8

And now you are at the CES factory. The place can hardly be called pleasant: darkness, dampness, corpses on the floor - all this clearly indicates that there are many necromorphs here who will do their best to make your passage of the game Dead Space 2 extremely exciting. First of all, once in the room with the store, replenish / sell stocks and save. I would recommend leaving you 40,000 credits, because soon you will have the opportunity to buy a classic suit. Then move through the door, specifying, if necessary, your own route using the locator. In the first room, pay attention to the wall on the right - here you can find power node 1 (8).

In the second room, with a holographic scheme in the center, you will find an emergency storage with VERY valuable contents (Classic Suit Diagram + 2 Power Nodes), however, after a certain period of time, Necromorphs will appear in the room, so be extremely careful. These creatures can even climb into emergency storage using ventilation, but if you ambush them there, it will be fun.

Having obtained the classic costume scheme, you can go to a store nearby where you have already visited and update your wardrobe, it’s only a pity that the “classic” costs 40,000. When you get to the room in which your hero will have visions, do not rush to continue the passage of the Dead Space game 2: on the left, on one of the walls, you can find the power node 4 (8).

Soon you will be able to see Ellie and Strauss, but there is bad news: to get to them, you will have to break through the processing halls. And in the next room, with a workbench in the middle, an ambush of necromorphs awaits you. To the left of the door, on the floor, is a diagram of contact mines. At the workbench, as always, you can improve your ammunition.

Behind the next door begins full-fledged fun. The fact is that you will have to go through a lot of obstacles, which, for sure, will get on your nerves well. First of all, you need to get off the ground, then take the accelerator with the help of kinesis and set it on the door, shoot at the red dot, the accelerator will work, turn the door, and you can go to the next stage.

Here Tightman will get in touch, who will report that he still intends to get you out of the way and therefore starts all the mechanisms. What exactly? To begin with, the passage of the game Dead Space 2 will introduce you to huge crushers, and the corpse, peacefully wandering in weightlessness, will clearly demonstrate what will happen to you if you hook them. In principle, there is nothing difficult to go through the crushers: first you need to go in the center, from above, then fly around to the right (this is if you count perpendicular to the ground). However, after that, be careful - non-coromorphs are everywhere, even in zero gravity.

Next, beams are waiting for you, which are temporarily interrupted by a moving metal platform. To deal with this obstacle, descend to the lower beam, fly close to it, and as the platform descends and passes through the beam above, accelerate (Shift) and fly through the lower beam. You can also use stasis to freeze the platform in the position you need. And again you are waiting for necromorphs - arrows. Next, you need to freeze the rotating blades with the help of stasis and quickly fly (when you freeze, pay attention to where the blades will move and fly so that you don’t rest against them). Necromorphs again.

Take the accelerator from the floor and attach it to the door from above. By shooting at the fuse, you activate the accelerator and can open the door. Rings of fire shouldn't be a problem, they ignite in the usual sequence. However, the problem awaits you on the other side: our old friend, the same as in space when you installed solar reflectors. From a dead monster, as always, a ruby ​​semiconductor will fall out.

Further, the bored "accelerator-door-shot" scheme awaits you again. Ellie will then contact you and ask you to hurry, which you will do after going through the door. Once in the room where you last saw Ellie, kill the monster and take power node 5 (7) from the wall.

Strauss and Ellie are waiting for you behind the next door. Now your main task is to get a vehicle to continue playing Dead Space 2. But first, carefully examine the room - you can find a lot of interesting things here: a diagram of a large first-aid kit in a dark corner to the left of the door, ammunition in boxes, a save point. Kinesis kick the tables near the door and welcome to the ninth chapter.

DEAD SPACE 2 CHAPTER 9

Chapter 9 starts off with a very interesting industrial setting, however as you walk through the metal catwalks you will soon run into a serious Necromorph ambush, so be prepared. Then you will find a direct section of the passage of the game Dead Space 2, in which you have to destroy the suddenly appearing necromorphs. Another room with a gut thrower and a sniper, in which you can find a shop. If you carefully collected all possible schemes, then you will surely be pleased with a large first-aid kit. Behind the door, in the modulation zone, a new type of enemy awaits you, which, in addition to having remarkable health, disintegrates into hated "spiders" after death, so it's better to first kill the main body, and then quickly finish off the "components" with a grenade . Next, you will find an elevator, a large room, a company - a black necromorph + an explosive and a power node 1 (9) on the right side of the room.

Plus, there is breakable glass in the room, but it will be quite difficult to use it. When you go a little further, you will see two corridors on the right, the first, blocked by laser streamers, will lead to a barricade of boxes. To remove the crates, use kinesis. Behind them you will find an audio recording and a flamethrower fuel diagram.

In the second corridor, on a distant wall, an enemy is waiting for you, fused with the wall, which produces small necromorphs. The best way destruction of the creature - installation of mines with a laser pistol directly under the body. Behind the destroyed monster you will find an elevator that will lead you straight to the ambush of the Necromorphs. But then you will find a workbench, a save point and a trolley launch mechanism. It is with the latter that you have to tinker the most. Pay attention to the mechanism in the center of the hall (on the sides there are two columns with symbols of kinesis). First of all, take a large part, highlighted in blue, on the right, near the stasis charge, and insert it into the control mechanism of the trolley, but be careful: an evil creature lurks under the part. Then, using kinesis, lift the column door up, freeze it with stasis, remove the part from there and insert it into the mechanism. Repeat the same operation with another column, and now the trolley is ready to be launched. Turn on the cart using the control panel and meet two black Necromorphs. Go to the trolley and, after opening the door for Strauss and Ellie, go down. And everything should have been fine, but suddenly the trolley stops, and your hero is forced to go for an inspection - this is required by the passage of the game Dead Space 2. Judging by the boxes of ammunition carefully left, you will soon have a lot of fun. You will get to the warehouse, on the right - power node 2 (9), directly ahead - mines.

Next, you will find many sudden attacks by runners, however, if you use the stasis lamps scattered around the warehouse, then it is more than realistic to cope with the creatures. Then, near the elevator, a familiar creature on the wall awaits you, the methods of dealing with which you already know from the passage of the game Dead Space 2. Do not rush to run to the elevator: behind the creature, in a small closet, you can find several first-aid kits and a diagram. After a corridor full of mines, a save point and a shop. Then you will need to use kinesis to take explosive canisters and throw their metal tank.

You need to go down the elevator, then pay attention to the installations on the walls on the right and left. Of these, you need to take an explosive canister and throw them into the tank in the center, and so you need to throw three or more canisters (depending on the difficulty level of passing the game Dead Space 2). But an already familiar brute will interfere with you, with the only difference being that now a new one appears in the place of each killed brute in a couple of seconds. So it's pointless to waste time and ammunition. You can run in circles, escaping from the brute, or freeze him into stasis. And wait until the explosive batteries in the installations are charged. Then get them with the help of kinesis and so on until the victorious explosion of the tank.

However, there is an alternative option, the essence of which is as follows:

• when you first encounter a tank into which you will throw canisters, standing on the balcony, use only canisters from the wall, without touching the two that lie on the floor;
• when the tank explodes, use kinesis to transfer the two surviving canisters to the elevator and go down;
• bring (but do not throw!) canisters in one place, take out 2 more canisters from the installations on the walls and put them together with the rest;
• collect ammunition in the hall, pick up one canister and throw it into the tank;
• freeze brute and quickly drop 3 more canisters;
• if necessary - add canisters from the walls.

Then use the elevator to go to Ellie and leave on the trolley. The only pity is that Tideman wants to stop you and blows up the path connecting the station and the government sector. It would seem that there is no hope, however, the ship from the first part of the Dead Space game - Ishimura, is parked on your part of the station ... Upon boarding, you will be taken to the walkthrough of the Dead Space 2 game chapter 10.

Unfortunately, there are flaws in games: brakes, low FPS, crashes, freezes, bugs and other minor and not very errors. Often problems begin before the game even starts, when it won't install, won't load, or won't even download. Yes, and the computer itself is sometimes weird, and then in Dead Space 2, instead of a picture, a black screen, control does not work, no sound is heard or anything else.

What to do first

1. Download and run the world famous CCleaner(download from a direct link) is a program that will clean your computer of unnecessary garbage, as a result of which the system will work faster after the first reboot;
2. Update all drivers in the system using the program Driver Updater(download via direct link) - it will scan your computer and update all drivers to the latest version in 5 minutes;
3. Install Advanced System Optimizer(download from a direct link) and turn on the game mode in it, which will end useless background processes during game launch and increase performance in the game.

The second thing to do if you encounter any problems with Dead Space 2 is to check the system requirements. In a good way, you need to do this even before the purchase, so as not to regret the money spent.

Dead Space 2 minimum system requirements:

Windows XP, Processor: Intel Pentium 4, 1 Gb RAM, 17 Gb HDD, nVidia GeForce 6800 Video memory: 256 Mb

Every gamer should at least have a little understanding of the components, to know why a video card, processor and other things are needed in the system unit.

Files, drivers and libraries

Almost every device in a computer requires a set of special software. These are drivers, libraries and other files that ensure the correct operation of the computer.

It's worth starting with the drivers for the video card. Modern graphics cards are produced by only two large companies - Nvidia and AMD. Having found out which product spins the coolers in the system unit, we go to the official website and download the package of fresh drivers:

A prerequisite for the successful functioning of Dead Space 2 is the availability of the latest drivers for all devices in the system. Download the utility Driver Updater to easily and quickly download the latest drivers and install them with one click:

If Dead Space 2 does not start, we recommend that you try disabling your antivirus or put the game in the antivirus exceptions, and also check the system requirements again and if something from your build does not match, then, if possible, improve your PC by purchasing more powerful accessories .

Dead Space 2 has black screen, white screen, color screen. Solution

Problems with screens of different colors can be roughly divided into 2 categories.

Firstly, they are often associated with the use of two video cards at once. For example, if your motherboard has a built-in video card, but you are playing on a discrete one, then Dead Space 2 may run on the built-in one for the first time, while you will not see the game itself, because the monitor is connected to a discrete video card.

Secondly, color screens happen when there are problems with displaying the image on the screen. This can happen for various reasons. For example, Dead Space 2 cannot work through an outdated driver or does not support a video card. Also, a black / white screen may be displayed when working at resolutions that are not supported by the game.

Dead Space 2 crashes. At a certain or random moment. Solution

You play for yourself, play and here - bam! - everything goes out, and now you have a desktop without any hint of the game. Why is this happening? To solve the problem, it is worth trying to figure out what the nature of the problem is.

If the crash occurs at a random point in time without any pattern, then with a probability of 99% we can say that this is a mistake of the game itself. In this case, fixing something is very difficult, and the best thing is to just put Dead Space 2 aside and wait for the patch.

However, if you know exactly at what moments the crash occurs, then you can continue the game, avoiding situations that provoke a crash.

However, if you know exactly at what moments the crash occurs, then you can continue the game, avoiding situations that provoke a crash. In addition, you can download the save Dead Space 2 and bypass the place of departure.

Dead Space 2 freezes. The picture freezes. Solution

The situation is about the same as with crashes: many freezes are directly related to the game itself, or rather, to the developer's mistake when creating it. However, a frozen picture can often become a starting point for investigating the deplorable state of a video card or processor.

So if the picture in Dead Space 2 freezes, then use the programs to display statistics on the loading of components. Perhaps your video card has long exhausted its working life or the processor is heating up to dangerous temperatures?

The easiest way to check the loading and temperatures for the video card and processors is in the MSI Afterburner program. If desired, you can even display these and many other parameters on top of the Dead Space 2 image.

What temperatures are dangerous? Processors and video cards have different operating temperatures. For video cards, they are usually 60-80 degrees Celsius. The processors are slightly lower - 40-70 degrees. If the processor temperature is higher, then you should check the condition of the thermal paste. It may have dried out and needs to be replaced.

If the video card is heating up, then you should use the driver or the official utility from the manufacturer. You need to increase the number of revolutions of the coolers and see if the operating temperature drops.

Dead Space 2 slows down. Low FPS. Frame rate drops. Solution

With slowdowns and low frame rates in Dead Space 2, the first step is to lower the graphics settings. Of course, there are a lot of them, so before reducing everything in a row, you should find out exactly how certain settings affect performance.

Screen resolution. In short, this is the number of points that make up the picture of the game. The higher the resolution, the higher the load on the video card. However, the increase in load is negligible, so reducing the screen resolution should only be the last resort, when everything else does not help.

Texture quality. Typically, this setting determines the resolution of texture files. Decrease the quality of textures if the video card has a small amount of video memory (less than 4 GB) or if a very old one is used HDD, the spindle speed of which is less than 7200.

Model quality(sometimes just details). This setting determines which set of 3D models will be used in the game. The higher the quality, the more polygons. Accordingly, high-poly models require more processing power of the video card (not to be confused with the amount of video memory!), which means that this parameter should be reduced on video cards with a low core or memory frequency.

Shadows. They are implemented in different ways. In some games, shadows are created dynamically, that is, they are calculated in real time every second of the game. Such dynamic shadows load both the processor and the video card. In order to optimize, developers often abandon the full rendering and add a pre-render of shadows to the game. They are static, because in fact they are just textures that are superimposed on top of the main textures, which means they load memory, and not the core of the video card.

Often, developers add additional settings related to shadows:

• Shadow Resolution - determines how detailed the shadow cast by the object will be. If the game has dynamic shadows, then it loads the core of the video card, and if a pre-created render is used, then it “eats” the video memory.
• Soft shadows - smoothing out bumps on the shadows themselves, usually this option is given along with dynamic shadows. Regardless of the type of shadows, it loads the video card in real time.

Smoothing. Allows you to get rid of ugly corners at the edges of objects by using a special algorithm, the essence of which is usually to generate several images at once and compare them, calculating the most “smooth” image. There are many different anti-aliasing algorithms that differ in their level of impact on the performance of Dead Space 2.

For example, MSAA works head-on, creating 2, 4, or 8 renders at once, so the frame rate is reduced by 2, 4, or 8 times, respectively. Algorithms such as FXAA and TAA operate a little differently, achieving a smooth image by calculating only the edges and using some other tricks. Because of this, they do not reduce performance as much.

Lighting. As in the case of anti-aliasing, there are different algorithms for lighting effects: SSAO, HBAO, HDAO. All of them use the resources of the video card, but they do it differently depending on the video card itself. The fact is that the HBAO algorithm was promoted mainly on video cards from Nvidia (GeForce line), so it works best on the “green” ones. HDAO, on the other hand, is optimized for AMD graphics cards. SSAO is the simplest type of lighting, it consumes the least resources, so in case of slowdowns in Dead Space 2, it is worth switching to it.

What should be lowered first? Shadows, anti-aliasing, and lighting effects are usually the most stressful, so it's best to start with them.

Often, gamers themselves have to optimize Dead Space 2. For almost all major releases, there are various relevant forums where users share their ways to improve performance.

One of them is a special program called Advanced System Optimizer. It is made specifically for those who do not want to manually clean up the computer from various temporary files, delete unnecessary registry entries and edit the startup list. Advanced System Optimizer will do this on its own and will also analyze your computer to find out how you can improve performance in applications and games.

Dead Space 2 lags. Big game delay. Solution

Many people confuse "lag" with "lag", but these problems have completely different causes. Dead Space 2 slows down when the frame rate at which the image is displayed on the monitor decreases, and lags when the delay when accessing the server or any other host is too high.

That is why "lags" can only be in network games. The reasons are different: bad network code, physical distance from servers, network congestion, incorrectly configured router, low Internet connection speed.

However, the latter is the least common. In online games, communication between the client and the server occurs by exchanging relatively short messages, so even 10 MB per second should be enough for the eyes.

There is no sound in Dead Space 2. I can not hear anything. Solution

Dead Space 2 works, but for some reason does not sound - this is another problem that gamers face. Of course, you can play like that, but it's still better to figure out what's the matter.

First you need to determine the scope of the problem. Where exactly is there no sound - only in the game or in general on the computer? If only in the game, then perhaps this is due to the fact that the sound card is very old and does not support DirectX.

If there is no sound at all, then the matter is definitely in the computer settings. Perhaps the sound card drivers are not installed correctly, or maybe there is no sound due to some specific error of our favorite Windows OS.

Controls don't work in Dead Space 2. Dead Space 2 does not see the mouse, keyboard or gamepad. Solution

How to play if it is impossible to control the process? The problems of supporting specific devices are out of place here, because we are talking about familiar devices - keyboard, mouse and controller.

Thus, errors in the game itself are practically excluded, almost always the problem is on the user's side. You can solve it in different ways, but, one way or another, you will have to turn to the driver. Usually, when you connect a new device, the operating system immediately tries to use one of the standard drivers, but some models of keyboards, mice, and gamepads are not compatible with them.

Thus, you need to find out the exact model of the device and try to find exactly its driver. Often, devices from well-known gaming brands come with their own software kits, since the standard Windows driver simply cannot ensure the correct operation of all the functions of a particular device.

If you don’t want to look for drivers for all devices separately, you can use the program Driver Updater. It is designed to automatically search for drivers, so you only need to wait for the scan results and download the necessary drivers in the program interface.

Quite often, the brakes in Dead Space 2 can be caused by viruses. In this case, there is no difference how powerful the video card is in the system unit. You can check your computer and clean it of viruses and other unwanted software using special programs. For example NOD32 . The antivirus has proven itself from the best side and has received the approval of millions of users around the world.

Suitable for both personal use and small businesses, ZoneAlarm is able to protect your computer with operating system Windows 10, Windows 8, Windows 7, Windows Vista and Windows XP from any attacks: phishing, viruses, malware, spyware and other cyber threats. New users are given a 30-day free trial.

Nod32 is an antivirus from ESET, which has received many awards for its contribution to the development of security. Versions of anti-virus programs for both PC and mobile devices are available on the developer's website, a 30-day trial version is provided. There are special conditions for business.

Dead Space 2 downloaded from torrent does not work. Solution

If the distribution kit of the game was downloaded via torrent, then in principle there can be no guarantees of work. Torrents and repacks are almost never updated through official applications and do not work over the network, because in the course of hacking, hackers cut out all network functions from games, which are often used to check the license.

Using such versions of games is not only inconvenient, but even dangerous, because very often many files have been changed in them. For example, to bypass protection, pirates modify an EXE file. However, no one knows what else they do with it. Maybe they're building a self-fulfilling software. For example, which, when the game is first launched, will be integrated into the system and will use its resources to ensure the well-being of hackers. Or, giving access to the computer to third parties. There are no guarantees and there cannot be.

In addition, the use of pirated versions is, according to our publication, theft. The developers have spent a lot of time creating the game, investing their own money in the hope that their offspring will pay off. And every work must be paid.

Therefore, if you encounter any problems with games downloaded from torrents or hacked using certain means, you should immediately remove the pirate, clean your computer with an antivirus and a licensed copy of the game. This will not only save you from dubious software, but also allow you to download updates for the game and receive official support from its creators.

Dead Space 2 gives an error about the missing DLL file. Solution

As a rule, problems associated with the absence of DLLs occur when you start Dead Space 2, however, sometimes the game can access certain DLLs in the process and, without finding them, crash in the most impudent manner.

To fix this error, you need to find the required DLL and install it on the system. The easiest way to do this is with a program. DLL fixer, which scans the system and helps you quickly find missing libraries.

If your problem turned out to be more specific, or if the method described in this article did not help, then you can ask other users in our "" section. They will promptly help you!

We thank you for your attention!

If Dead Space 2 crashes, Dead Space 2 won't start, Dead Space 2 not installing, there are no controls in Dead Space 2, no sound in game, errors happen in Dead Space 2 - we suggest you the most common ways to solve these problems.

First, check if your PC meets the minimum system requirements:

• OS: Windows XP (SP2)/Vista/7
• Processor: Pentium IV 2.8 GHz/AMD Athlon64 3000+ or ​​better
• Memory: 1GB (XP)/2GB (Vista/7)
• Video: 256 MB with Shader Model 3.0 support (NVIDIA GeForce 6800/ATI X1600 Pro)
• HDD: 10 GB

Be sure to update your video card drivers and other software

Before you remember the worst words and express them towards the developers, do not forget to go to the official website of the manufacturer of your video card and download the latest drivers. Often, specially optimized drivers are prepared for the release of games. You can also try installing a later version of the drivers if the problem is not solved by installing the current version.

It is important to remember that you should download only the final versions of video cards - try not to use beta versions, as they may have a large number of bugs not found and not fixed.

Do not forget that games often require installation for stable operation. latest version DirectX, which can always be downloaded from the official Microsoft website.

Dead Space 2 won't launch

Many problems with launching games happen due to incorrect installation. Check if there were any errors during the installation, try uninstalling the game and running the installer again, after disabling the antivirus - often the files needed for the game to work are deleted by mistake. It is also important to remember that in the path to the folder with installed game there should be no Cyrillic characters - use only Latin letters and numbers for directory names.

It still does not hurt to check if there is enough space on the HDD for installation. You can try to run the game as Administrator in compatibility mode with different versions of Windows.

Dead Space 2 slows down. Low FPS. Logs. Friezes. hangs up

First - install the latest drivers for the video card, from this FPS in the game can rise significantly. Also check the computer's load in the task manager (opened by pressing CTRL + SHIFT + ESCAPE). If, before starting the game, you see that some process is consuming too many resources, turn off its program or simply end this process from the task manager.

Next, go to the graphics settings in the game. First of all, turn off anti-aliasing and try lowering the settings responsible for post-processing. Many of them consume a lot of resources and disabling them will significantly increase performance without greatly affecting the quality of the picture.

Dead Space 2 crashes to desktop

If Dead Space 2 often crashes to your desktop, try lowering the graphics quality to start solving the problem. It is possible that your computer simply does not have enough performance and the game cannot work correctly. It is also worth checking for updates - most modern games have a system for automatically installing new patches. Check if this option is disabled in the settings.

Black screen in Dead Space 2

More often than not, the problem with the black screen is an issue with the GPU. Check if your graphics card meets the minimum requirements and install the latest drivers. Sometimes a black screen is the result of insufficient CPU performance.

If everything is fine with the hardware, and it meets the minimum requirements, try switching to another window (ALT + TAB), and then return to the game window.

Dead Space 2 is not installed. Installation stuck

First of all, check if you have enough HDD space for installation. Please note that the installer requires the advertised amount of space plus 1-2 gigabytes of free space on the system drive. In general, remember the rule - the system disk should always have at least 2 gigabytes of free space for temporary files. Otherwise, both games and programs may not work correctly or refuse to start at all.

Installation problems can also occur due to lack of Internet connection or its unstable operation. Also, do not forget to suspend the antivirus while installing the game - sometimes it interferes with the correct copying of files or deletes them by mistake, considering them viruses.

Saves not working in Dead Space 2

By analogy with the previous solution, check the availability of free space on the HDD - both on the one where the game is installed and on the system drive. Often save files are stored in a folder of documents, which is located separately from the game itself.

Controls not working in Dead Space 2

Sometimes the controls in the game do not work due to the simultaneous connection of several input devices. Try disabling the gamepad, or if for some reason you have two keyboards or mice connected, leave only one pair of devices. If the gamepad does not work for you, then remember that only controllers that are defined as Xbox joysticks officially support games. If your controller is defined differently, try using programs that emulate Xbox joysticks (for example, x360ce).

Sound not working in Dead Space 2

Check if the sound works in other programs. After that, check if the sound is turned off in the settings of the game itself and if the sound playback device is selected there, to which your speakers or headset are connected. Next, while the game is running, open the mixer and check if the sound is muted there.

If you are using an external sound card, check for new drivers on the manufacturer's website.

GAMES The Division 2 takes place in Washington D.C. where gamers need to fight new enemies. However, with the upcoming update, the plot will again be transferred to New York (the setting of the first part) - in a small ...