Tablets and capsules for coins, providing a high degree of safety. Coin Collection Boxes How to Make a Coin Collection Book

Numismatics (collecting coins and banknotes) is still one of the most popular hobbies. Someone simply collects commemorative ten-ruble coins, someone brings new copies from travels and business trips. Experienced numismatists even buy rare coins on purpose, trying to replenish their collection with rare items. In any case, sooner or later the question arises: how to store all this wealth? In this article, we will show you how to make an album for coins quickly and easily with your own hands.

We are trying to create an album for coins with our own hands

In specialized stores you can find a variety of albums. Most often, it is offered to buy separate transparent sheets with slots for coins of different diameters or banknotes, with or without a place for signatures. However, this is not a cheap pleasure, and if you are not sure that numismatics is your hobby for life, or just want to save a little money, then the best option is to make an album yourself.

• ring folder (you can use any other cardboard folder, for example, with a binder, but the “ring” option looks much neater)
• sheets of A4 paper
• transparent stationery files (it is better to choose dense ones)
• felt-tip pen
• ruler
• soldering iron
• narrow stationery tape
• stationery knife

1) We start our master class by preparing a paper template. On a sheet of A4 paper, using a ruler and a felt-tip pen, you need to draw a stencil, which is a mesh cell. Each of the cells will contain one coin (in this case, different cells can be of different sizes, depending on the instances in your collection). It is important to remember that the size of each cell should be slightly larger than the size of the coin that is planned to be placed there.

2) Carefully attach the finished stencil under the stationery file using adhesive tape.

3) Heat the soldering iron and carefully circle each of the cells along the contour - polyethylene should stick together at the heating points, but no through holes should be obtained. If this is your first time working with a soldering iron and you are feeling insecure, it is best to practice on a draft file.

7) So our album for coins is ready - we have made a convenient storage for all copies of the collection.

As you can see, almost no complicated tools are required to make an album for coins in the above way, with the exception, perhaps, of a soldering iron. Is it possible to do without it? Of course, there is another way.

• ring binder (you can also use a binder binder, but the ring binder looks much neater)
• A4 transparent plastic folders
• felt-tip pen
• ruler
• sewing machine (if you don’t have one, you can use an awl and thread with a needle, but in this case the process will take much longer)
• narrow stationery tape
• stationery knife

1) As in the first case, we first make a paper template. On a sheet of A4 paper, using a ruler and a felt-tip pen, you need to draw a stencil, which is a mesh cell. The capsules will contain one coin each (in this case, different cells may be of different sizes, depending on the instances in your collection). It is important to remember that the size of each cell should be slightly larger than the size of the coin that is planned to be placed there.

2) Carefully attach the finished stencil under the plastic folder with adhesive tape and transfer the outlined lines to the plastic.

3) With the help of a sewing machine, we sew seams along the marked lines. If the sewing machine is not available or cannot cope with hard plastic, you can try to sew the cells manually.

4) Take a clerical knife (it should be sharp enough) and cut each cell along the top edge along the ruler. You need to cut from the back side of the file, carefully making sure that the knife does not cut through the front side. We got slots in which you need to put coins.

5) We put coins in the slots. Please note that moments must be thoroughly cleaned with citric acid or a special factory cleaner before being placed in the album.

6) Carefully seal the slots on the reverse side of the files with tape.

7) The album for coins, made without a soldering iron, is ready!

Video on the topic of the article

For more clarity, we suggest watching the following videos, which demonstrate in detail how to make an album for coins.

Any numismatist can make an album for coins with his own hands. It takes a lot of space to store a lot of coins. The master class presented in this article will teach you how to make a beautiful and roomy album.

Varieties for numismatists

Albums with coins are sold in special shops for numismatists. There are many varieties of albums, but most often sellers offer buyers separate special sheets with special money holes of different sizes. There is a special place for a signature. Such albums have a very high price, so not every collector can afford this luxury, it is easier to make an album on your own.

There are 2 ways to make a coin album. In our material, both methods will be described in detail.

First option

Materials and tools for the product:

1. Folder made of cardboard with a binder, or on rings;
2. A4 thick paper sheets;
3. Dense and transparent stationery files;
4. Marker;
5. Ruler;
6. soldering iron;
7. Two clerical knives - narrow and regular.

First you need to make a paper diagram. Take a sheet of A4 paper and draw a stencil grid, where each cell will contain a coin. The size of the cells should be slightly larger than the size of the cells in the collection.

At the next stage, carefully fix the diagram under the stationery file with tape. Now heat the soldering iron and gently circle each cell with a sting over the office. Under the action of high temperature, the contour on the polyethylene will melt.

Pay special attention to this moment! When working with a soldering iron, there should be no through holes.

Cut off the top of the cell with a utility knife. It is important to start the incision from the inside out. There will be money holes. Clean the coins with citric acid and place in capsules. Seal the holes on the back with tape.

Second way

This method is much simpler than the first, because in the process you can do without a soldering iron.

It is necessary to prepare such materials and tools:

• Folder with rings;
• Plastic and transparent folders in A4 format;
• felt-tip pens;
• Stationery ruler;
• Sewing machine;
• 2 types of stationery knives - narrow and regular.

Beginning of work:

1. Draw a template with a ruler and marker. Draw a stencil on a paper sheet in the form of a grid. One coin is filled into a capsule. Cells should be 2 times larger than collectible coins.

1. With adhesive tape, the stencil is fixed under the plastic folder. Transfer all lines to the plastic base.
2. Sew the seams along the lines with a sewing machine.
3. With a sharp clerical knife, cut off the top edge of the cell along the line. The cuts start from the wrong side.
4. Clean the coins with a cleaning agent and put in capsules.
5. Seal the reverse side of the cells with adhesive tape.

Album for numismatists is ready!

Numismatics (collecting coins and banknotes) is still one of the most popular hobbies. Someone simply collects commemorative ten-ruble coins, someone brings new copies from travels and business trips. Experienced numismatists even buy rare coins on purpose, trying to replenish their collection with rare items. In any case, sooner or later the question arises: how to store all this wealth? In this article, we will show you how to make an album for coins quickly and easily with your own hands.

We are trying to create an album for coins with our own hands

In specialized stores you can find a variety of albums. Most often, it is offered to buy separate transparent sheets with slots for coins of different diameters or banknotes, with or without a place for signatures. However, this is not a cheap pleasure, and if you are not sure that numismatics is your hobby for life, or just want to save a little money, then the best option is to make an album yourself.

• ring folder (you can use any other cardboard folder, for example, with a binder, but the “ring” option looks much neater)
• sheets of A4 paper
• transparent stationery files (it is better to choose dense ones)
• felt-tip pen
• ruler
• soldering iron
• narrow stationery tape
• stationery knife

1) We start our master class by preparing a paper template. On a sheet of A4 paper, using a ruler and a felt-tip pen, you need to draw a stencil, which is a mesh cell. Each of the cells will contain one coin (in this case, different cells can be of different sizes, depending on the instances in your collection). It is important to remember that the size of each cell should be slightly larger than the size of the coin that is planned to be placed there.

2) Carefully attach the finished stencil under the stationery file using adhesive tape.

3) Heat the soldering iron and carefully circle each of the cells along the contour - polyethylene should stick together at the heating points, but no through holes should be obtained. If this is your first time working with a soldering iron and you are feeling insecure, it is best to practice on a draft file.

7) So our album for coins is ready - we have made a convenient storage for all copies of the collection.

As you can see, almost no complicated tools are required to make an album for coins in the above way, with the exception, perhaps, of a soldering iron. Is it possible to do without it? Of course, there is another way.

• ring binder (you can also use a binder binder, but the ring binder looks much neater)
• A4 transparent plastic folders
• felt-tip pen
• ruler
• sewing machine (if you don’t have one, you can use an awl and thread with a needle, but in this case the process will take much longer)
• narrow stationery tape
• stationery knife

1) As in the first case, we first make a paper template. On a sheet of A4 paper, using a ruler and a felt-tip pen, you need to draw a stencil, which is a mesh cell. The capsules will contain one coin each (in this case, different cells may be of different sizes, depending on the instances in your collection). It is important to remember that the size of each cell should be slightly larger than the size of the coin that is planned to be placed there.

2) Carefully attach the finished stencil under the plastic folder with adhesive tape and transfer the outlined lines to the plastic.

3) With the help of a sewing machine, we sew seams along the marked lines. If the sewing machine is not available or cannot cope with hard plastic, you can try to sew the cells manually.

4) Take a clerical knife (it should be sharp enough) and cut each cell along the top edge along the ruler. You need to cut from the back side of the file, carefully making sure that the knife does not cut through the front side. We got slots in which you need to put coins.

5) We put coins in the slots. Please note that moments must be thoroughly cleaned with citric acid or a special factory cleaner before being placed in the album.

6) Carefully seal the slots on the reverse side of the files with tape.

7) The album for coins, made without a soldering iron, is ready!

Video on the topic of the article

For more clarity, we suggest watching the following videos, which demonstrate in detail how to make an album for coins.

Every numismatist ever faces the problem - where to store his ever-growing collection of coins? Many people who collect coins have kept more and more albums for their storage over the years. But even if you are just a beginner and your collection is still small, you should think from the very beginning about how to arrange and organize your coins. If you are a truly enthusiastic person, then your collection will be constantly replenished. That's when you need an album, or even several.

Those albums for coins that we can find on sale, as a rule, are very convenient and beautiful in appearance. But, unfortunately, the prices for such albums are high and not everyone can buy them.

But you can make DIY album. Here you have absolute freedom of choice. You yourself choose the design and decoration, set the optimal cell size.

From the materials you will need:

transparent files,

A4 paper,

paperclips,

Paper Staple Tool,

soldering iron,

Pencil, stationery knife, tape, square.

Making your own album is easy.

Take a sheet of thick paper of your choice and draw it into squares of the required size (the size is determined by the diameter of the coin). Cells can be either equal or different in size - both options are considered acceptable. Place a file under the lined sheet, as well as another paper sheet. This whole structure is fixed with staples.

The next step is to work with a soldering iron. You simply outline the cells, trying not to damage the file. Many people don't know how to work with it. If you are one of them, then use a ruler to draw a straight line. This stage of making an album is considered to be very time-consuming, but you should not be afraid - over time you will adapt and feel more confident.

So, you have finally mastered the work with a soldering iron and are ready to continue working on the album. With a sharp clerical knife, neat slots for coins are made in each of the cells on the back side.

Now it's time to place the coins in the slots and fix their position with stationery tape. Just seal the cut on the reverse side - the coin will no longer be able to fall out. At the same time, stationery tape can be easily peeled off if you need to remove your coin.

Finally, when your album is almost ready, it remains only to collect all the sheets together with the help of a binder.

OTHER OPTIONS:

Having dismantled the coin albums, we realized that contact with air gradually devalues ​​the coin, since the oxidation process can greatly change the color of its surface. A dark coin, even without a single scratch and notch, will no longer be considered an "Unc" level. And in the subsequent sale, its price will be noticeably lower than that of its sisters, which show an undisturbed golden brilliance, as if they had just left the mint.

For the domestic anniversary, the loss of luster of the brass ring of bimetallic tens and the darkening of steel tens with a brass coating are critical. Therefore, most of the questions related to the choice of capsules refer to these coins. We find out the exact diameter of the coin with the help of a caliper. Experts are wary of using other measuring instruments like a tape measure or a ruler, as they can scratch the surface of the coin, permanently knocking it out of the "UNC" category. Since not every house has a caliper, and if there is, then there is a risk of spoiling the edge of a valuable specimen, reference information is also quite suitable. Looking at our catalog, you can find out without measurements that the diameter of a bimetallic tens is 27 millimeters, and for a steel tens, its value will be half a centimeter less (22 millimeters).

Plastic tubes for coins

The famous question "Which came first: the chicken or the egg?" can be rephrased as "Which came first: tubes or coin capsules?" There will not be a long historical digression into ancient times, since plastics were invented not so long ago. Collectors have long been accustomed to using rounded plastic containers for storing duplicates. It remained to wait for someone to give these containers transparency and adjust them to the diameter of the most common coins. Tubes are used exclusively for storage, and not for displaying coins. When choosing a tube, pay attention to the tightness of its cap. Some attention should also be paid when loading coins into a tube so as not to damage the specimens.

Capsule inner and outer diameter

When choosing a capsule, there are some nuances. If you take a capsule with an inner diameter of 27 millimeters for a bimetallic ten, the coin can lie down, pressed against the walls so tightly that it will be impossible to get it out of there. Or rather, to release the coin, you have to break the capsule. This does not frighten those who treat capsules as consumables at all. Capsule makers designed the capsules to break without damaging the coin. Mints, when packing their products in capsules, adhere to exactly the strict correspondence between the diameter of the coin and the inner diameter of the capsule.

A different strategy is chosen by those who consider the capsule as valuable an acquisition as the coin stored in it. Then a capsule is selected whose inner diameter is one millimeter larger than the coin. In this case, the coin is easily removed. But it is worth noting that this method of storage is not effective when a copy is constantly transferred, since a coin in motion along the capsule can receive microdamages.

However, manufacturers often indicate not the inner, but the outer diameter of the capsule. Here the calculations are easy. Well-known firms adhere to the rule that the outer diameter differs from the inner by six millimeters. The gradation of the diameter is 0.5 mm (27 mm, 27.5 mm, 28 mm, and so on).

What if the coin does not have a diameter that matches the inner diameter of the capsule? Take, for example, billon coins of the pre-revolutionary period. A hryvnia has a diameter of 17.27 mm, a five-kopeck piece - 19.56 mm, a two-hry coin - 21.8 mm. Only experience with the products of a particular manufacturer will help here. It is quite possible that a dime will fit tightly into a seventeen-millimeter capsule at a certain pressure from above, but the same capsule from another company will not let this coin into itself. But when choosing a capsule of 17.5 millimeters, you can find both a dense occurrence of a coin and its obvious chatter when shaking the capsule.

Capsules with inserts and square capsules

Previously, the elimination of chatter was provided by exotic methods like a cotton ball. Now, capsules are being produced, in which there is a whole arsenal of internal linings, the use of which allows you to tightly fix the coin.

The same problem is solved by using square capsules, where the diameter of the hole of the inner insert varies. The inner insert is often made of elastic materials, which allows for a quality insertion of the coin. As collectors say, such capsules have only one drawback: the insert makes it difficult to see the edge of the coin. The square capsules themselves can be inserted into the cells of a special album, like holders.

Coin Tablets

Coins in capsules look more representative on specialized plates with a substrate. We can say that the tablet is a mini-showcase. There are tablets with a substrate and a sealed lid, which are a kind of large capsule.

Mini-plates are used by mints to colorfully design themed coin sets. Kits can be in simple plastic tablets. Here, unfortunately, the issues of safety of coins are very relevant. A large number of annual sets of the State Bank of the USSR are known, in which coins are hopelessly damaged due to the anti-neutral characteristics of plastic.

Tablets with a velvet backing turned out to be more spectacular. Thus, sets of Olympic rubles and silver of the 1980 Olympics, held in Moscow, are presented. It should be noted that here, too, the manufacturers did not take care of the capsules, so silver is often put up for sale darkened. The most preferred combination is Capsules + Tablets. This is how collectible sets of modern weather are formed.

The next step is to combine the tablets into the münzkabinet, but another article on our site will tell about this stage of the collection evolution. But before that, we advise you to visit the "Accessories" section of our store, where you can study in detail the various types of capsules and immediately purchase a set of the right size for your coins.